Skip to content

Tirzepatide dosage calculator and complete units chart

Check the relationship between prescribed tirzepatide mg, liquid mL, and a U-100 syringe. Use the exact concentration and presentation your pharmacy dispensed.

Last editorially updated: · By Jeff Schaeffer

Not medical advice. Talk to your prescriber and pharmacist. Confirm your prescribed dose, product, concentration, device, and instructions before using any calculation. This website cannot choose or change your treatment.

Check prescribed mg against a verified vial concentration

Blank fields are intentional. Copy the numbers from your prescription and pharmacy label; no suggested dose is preselected.

— U-100 units

— mL

Enter both values to see the arithmetic.

Tirzepatide units chart: all retained arithmetic examples

Each column is an example concentration in mg/mL, not a claim about available products. Each cell is U-100 volume units. Rows preserve the old lookup information; they are not a recommended dose schedule. Some rows are not labeled doses. Use only the exact dose and concentration confirmed by your prescriber and pharmacy. Values are displayed to four decimal places; this is mathematical precision, not syringe precision.

Tirzepatide example mg → U-100 units, by concentration
Example mg5 mg/mL10 mg/mL15 mg/mL20 mg/mL30 mg/mL
1 mg20106.666753.3333
1.25 mg2512.58.33336.254.1667
2 mg402013.3333106.6667
2.5 mg502516.666712.58.3333
3 mg6030201510
3.75 mg7537.52518.7512.5
4 mg804026.66672013.3333
5 mg1005033.33332516.6667
6 mg120†60403020
6.25 mg125†62.541.666731.2520.8333
7 mg140†7046.66673523.3333
7.5 mg150†755037.525
8 mg160†8053.33334026.6667
8.75 mg175†87.558.333343.7529.1667
10 mg200†10066.66675033.3333
11.25 mg225†112.5†7556.2537.5
12.5 mg250†125†83.333362.541.6667
15 mg300†150†1007550

† More than 100 units means more than 1 mL. Stop and ask the pharmacy to reconcile the prescription and device; do not split injections or improvise a larger device from this chart. To find mL, divide the displayed units by 100. Fractional markings require pharmacist confirmation.

How this is calculated: every formula is written out on this page, the sources are listed at the bottom, and our editorial policy explains how we check and correct numbers.

Comparing GLP-1 program costs?

Use your actual provider quote to estimate the full cost with our cost calculator. You can also review pricing and eligibility directly with a telehealth provider.

SkinnyRxOral and injectable GLP-1 options, with financing.See SkinnyRx options →

Disclosure: GLP1 Math may earn a commission if you sign up through these links. It costs you nothing extra and does not change what the calculators show. A provider listing is not a medical recommendation.

Separate the medication amount from the device

Tirzepatide is the active ingredient in Zepbound and Mounjaro, but a drug name alone is not enough to calculate a syringe volume. You also need the exact prescription and the presentation supplied. Current labeling includes multiple device and vial formats. A pen, a single-dose vial, and a multidose vial can have different instructions even when the medicine name matches. Start with the pharmacy label and product Instructions for Use, not with a photograph of someone else's syringe or the number of milligrams printed on a carton.

This page combines our calculator and all historical tirzepatide concentration tables. It is intended to help explain an already confirmed measurement. It cannot decide whether a prescription should use a particular presentation, whether a compounded product is appropriate, or how to change brands. The chart's concentrations are arithmetic examples, not a current catalog. The medicine and device in your hand must be identified before any of these results can be interpreted safely.

Work through a complete conversion

The calculation has two steps: prescribed mg divided by mg/mL gives the volume in mL; that volume multiplied by 100 gives U-100 syringe units. Suppose, solely as an arithmetic example, the prescribed amount is 5 mg and the verified concentration is 10 mg/mL. Five divided by ten equals 0.5 mL. On a U-100 scale, 0.5 mL corresponds to 50 units. Reverse the result by calculating 50 ÷ 100 × 10 = 5 mg.

Now change only the example concentration to 20 mg/mL. Five mg requires 0.25 mL, or 25 U-100 units. A stronger liquid needs less volume for the same medicine amount. The reverse check is 25 ÷ 100 × 20 = 5 mg. Notice that the numbers 25 and 50 describe volumes in these examples, not a change in the prescription. This distinction is especially useful when a pharmacy changes concentration between fills and the new instructions look unexpectedly different.

The vial's total strength is not always its concentration

A label may show a total amount and total volume rather than a single concentration. For example, 30 mg in 3 mL means 10 mg/mL because 30 ÷ 3 = 10. It does not mean 30 mg/mL. Read the whole expression and ask whether it refers to one dose or the whole container. The available container volume is not proof of the usable liquid volume, and visible leftover liquid does not establish an additional labeled dose.

For branded presentations, follow the labeled dose volume and supplied training. Do not use this general calculator to override those instructions. The current tirzepatide labels distinguish examples of 0.5 mL and 0.6 mL administration volumes across presentations. That alone shows why a remembered volume from a prior box is insufficient. The concentration guide explains the arithmetic, while the product label and pharmacist establish which numbers belong in it.

How to use the consolidated table

Choose a row only after the prescriber has chosen the medicine amount. Match the column to the exact confirmed concentration. Each cell is a U-100 volume marking. The listed rows include historical lookup amounts, some of which are not labeled dose steps. They are not a menu of treatment options. If your concentration is not represented, use the blank calculator with the verified value; do not approximate by choosing a nearby column.

For a result that repeats as a decimal, the table displays up to four places. That makes the arithmetic transparent without implying a syringe can measure that precision. A value above 100 units represents more than 1 mL and is flagged. Neither a fractional result nor an over-capacity result should be solved by improvising an injection technique. Ask the pharmacy to confirm the prescription, presentation, and appropriate device. This page does not recommend splitting doses, storing leftovers, or altering a supplied product.

A syringe scale is not a medication equivalence

A U-100 insulin syringe uses 100 markings for each milliliter. Ten units represents 0.1 mL, and 60 units represents 0.6 mL. Those volume relationships apply only to that scale. They do not mean tirzepatide is insulin, and they do not express biological potency. Use the syringe your pharmacy specifies. Verify its capacity and the interval between marked lines; two syringes with the same maximum number need not have equally fine graduations.

The U-100 guide explains how to count intervals and ask for a demonstration of the correct plunger reference edge. Avoid reading at an angle, confusing a numbered line with a neighboring short line, or assuming a picture on a screen is drawn to scale. If you cannot clearly see the marking or the calculated number falls between available graduations, ask for help before measuring a dose. The calculator cannot detect those physical limitations.

Dose progression belongs to the brand label and prescriber

Zepbound's adult weight-management label starts with 2.5 mg weekly for four weeks and then 5 mg. Later increases occur in 2.5 mg increments after at least four weeks at the current amount, with response and tolerability considered. Its weight-management maintenance options are 5, 10, or 15 mg. This is a label summary, not a direction for you to increase. The schedule tool marks later dates as conditional discussion points rather than automatic escalation appointments.

Mounjaro's current label has its own indication and age-specific details. Do not apply an adult maximum to a child or assume every detail is identical to Zepbound. Likewise, there is no validated arithmetic rule that converts a semaglutide dose into an equivalent tirzepatide dose. Their mg amounts cannot be compared as if they were different concentrations of the same medicine. Read our switching discussion guide to prepare questions for a prescriber, not to choose a starting dose.

Missed injections and storage are separate decisions

Both Zepbound and Mounjaro labels say to administer a missed dose within four days, or 96 hours. If more than four days have elapsed, skip the missed dose and use the regular scheduled day. Their instructions also require at least three days, or 72 hours, between doses when changing the weekly day. Do not turn a missed week into a larger amount in the calculator. For multiple missed weeks or uncertainty about a recent injection, ask the prescriber; this page supplies no invented restart dose.

Storage limits depend on presentation. Current labels allow specified single-dose pens and vials up to a total of 21 days unrefrigerated at no more than 30°C, while multidose vials and KwikPens have different limits, including after first use. Do not transfer the 21-day statement to every tirzepatide container. Keep the original packaging, record the opening date where relevant, and confirm the label's disposal rules even if liquid remains. Compounded products require the dispensing pharmacy's own instructions and beyond-use date.

A useful final check before calling the pharmacy

Write four items together: product and presentation, prescribed mg, verified mg/mL, and the calculated mL and U-100 units. Read them back to the pharmacist as one connected statement. If the pharmacy directions and calculator disagree, the discrepancy needs investigation rather than choosing whichever number seems familiar. If an uncertain amount has already been injected, contact your prescriber, pharmacist, or Poison Control promptly. For severe symptoms seek emergency care. This is an arithmetic aid, not a way to assess whether an exposure is safe.

Frequently asked questions

Are 50 units always 5 mg of tirzepatide?

No. Fifty U-100 units equals 0.5 mL. It contains 5 mg only at 10 mg/mL. Another concentration changes the medicine amount while the syringe volume stays the same. Check the current vial rather than a remembered conversion.

Can I reuse my semaglutide syringe number?

Do not carry the number over as a dose. The new medicine and concentration need their own prescription and measurement instructions. There is no mg-to-mg clinical conversion between semaglutide and tirzepatide.

Does the chart recommend all listed amounts?

No. It preserves mathematical examples from old lookup pages, including amounts outside labeled dose steps. The table cannot authorize a dose, formulation, or schedule. A prescriber must establish the treatment first.

What if my package says 0.6 mL?

Use the Instructions for Use for that exact presentation and confirm the supplied syringe with the pharmacist. A remembered 0.5 mL instruction from a different presentation is not a substitute for your current label.

Can I use extra liquid left in a vial or pen?

Do not infer an additional dose from visible residual liquid. Follow the product-specific disposal instructions and ask the pharmacy about any apparent discrepancy. The calculator cannot assess sterility, overfill, or the remaining usable quantity.

Does a missed dose change the conversion?

The arithmetic remains the same, but whether and when to inject is a separate question. Follow the product label and prescriber. Do not increase mg or units to compensate for an omitted injection.

Can this tool check a compounded product?

It can check arithmetic using a verified concentration, but it cannot verify ingredients, quality, legality, sterility, or appropriateness. Those are questions for the dispensing pharmacy, prescriber, and relevant regulators.

Sources

Related reading